Nad T775 Manuel d'utilisateur Page 18

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 44
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 17
ANALOG AUDIO
The T 775 has nine analog audio inputs including 7.1 input. These analog inputs - Audio 1, Audio 2,
Audio 3, Audio 4, Audio 5, Audio 6, Audio Front, Audio MP and 7.1 Input can be variably assigned to
each Source.
Scroll to Analog Audio and then press to select and assign an analog audio input to the particular
Source. There are three choices – Audio, 7.1 Input or O.
When Audio is chosen, press and then keys to select and assign the desired audio input – 1 to
6, Front and MP.
Select ‘7.1 Input’ to choose the audio signal fed to ‘7.1 Channel Input. If ‘O is selected, no incoming
analog audio signal is selected by the particular Source.
NOTE
An incoming digital signal present at the assigned digital input will always take precedence over the
assigned analog audio input, even if both are present. To maintain the analog audio input for the
particular Source, select ‘O’ at the ‘Digital Audio’ setting of the same ‘Source’ menu.
GAIN
Gain adjustment allows all sources to play back at the same volume so you don’t need to adjust the
volume every time a new source is selected. It is generally preferable to reduce the level of the loudest
source rather than making louder the softer sources.
Scroll to ‘Gain’, press and then to step through the desired level from -12dB to 12dB.
DIGITAL AUDIO
To take advantage of the T 775’s high performance surround and digital audio circuitry, it is advisable
that its Digital Audio inputs are selected.
There are three types of Digital Audio input for the T 775. These are HDMI, Optical and Coaxial digital inputs.
A fourth option is ‘O whereby no incoming digital audio signal is selected by the particular Source.
The desired digital audio input for a particular Source can be selected by scrolling to ‘Digital Audio,
press and then to step through the desired digital input source. After nalizing the desired type
of Digital Audio input, press and then again to select the specic Digital Audio input.
There are eleven Digital Audio inputs selectable for the T 775. They are the following
HDMI HDMI 1, HDMI 2, HDMI 3, HDMI 4
Optical Optical 1, Optical 2, Optical 3, Optical Front
Coaxial Coaxial 1, Coaxial 2, Coaxial 3
NOTE
An incoming digital signal present at the assigned digital input will always take precedence over the
assigned analog audio input, even if both are present. To maintain the analog audio input for the
particular Source, select ‘O’ at the ‘Digital Audio’ setting of the same ‘Source’ menu.
VIDEO
There are four types of video input a particular Source could be assigned. These are HDMI, Component,
S-Video and Video inputs. A fth option is ‘O wherein the particular Source is prompted not to select
any Video input.
Navigate through the Video input selections by pressing and then to step through the
selections. The following are the assignable Video inputs
HDMI HDMI 1, HDMI 2, HDMI 3, HDMI 4
Component Video Component 1, Component 2, Component 3
S-Video S-Video 1, S-Video 2, S-Video 3, S-Video 4, S-Video 5, S-Video Front
Video Video 1, Video 2, Video 3, Video 4, Video 5, Video Front
OPERATION
USING THE T 775  SETUP MENU
18
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
Vue de la page 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Commentaires sur ces manuels

Pas de commentaire