NAD M15 HD2 AV Manuel du propriétaire télécharger pdf (Page 15)

SETUP MENU

The Setup Menu allows one to customize the operation of the M15 HD to the

ancillary equipment used in one’s specic AV system. Unless your system exactly

matches the factory defaults as shown in the accompanying Quick Start Guide, you

will need to use the setup menu to congure the inputs of the M15 HD.

At Setup Menu, the following are congurable – HDMI Setup, Source Setup,

Speaker Setup, Zone Setup, Trigger Setup, Listening Mode Setup, Display

Setup and A/V Presets.

To access and navigate through Setup Menu and its sub-menu selections,

please refer to and follow the directions stated in the sections ‘Display the

OSD’ and ‘Navigating the OSD and Making Changes.’

HDMI SETUP

The M15 HD supports HDMI Control (CEC) and Audio Return Channel (ARC)

functions. Both functions are possible if external devices that also support

both features are interconnected with the M15 HD via HDMI connection.

HDMI CONTROL CEC

Consumer Electronics Control (CEC) is a set of commands that utilizes

HDMI’s two- way communication to allow for single remote control of any

CEC-enabled devices connected with HDMI. A CEC command will trigger

the necessary commands over HDMI for an entire system to auto-congure

itself to respond to the command.

When devices that support HDMI Control (CEC) are connected, the

following modes of operation can be executed via the M15 HD or the

external device using any of the device’s remote control.

O: Applies to all CEC options below. At “O” setting, particular CEC

feature is defeated.

On: At “On” setting, the M15 HD will automatically go to standby mode

if it receives a CEC standby command. On the other hand, if the M15 HD

receives a CEC power up command, the M15 HD will correspondingly

switch ON from standby mode.

Source Switch: At “On” setting, the M15 HD will automatically switch

sources if another CEC device requests a Source change.

For example, if PLAY is pressed on a BD Player with CEC, the M15 HD

and TV with CEC will automatically switch to their respective input

connections – the M15 HD switching to the HDMI input where the

BD Player is connected while the TV will switch to its input where the

M15 HD’s HDMI MONITOR OUT is connected. This completes the auto-

conguration – the BD Player is automatically played back using the

M15 HD and TV.

Audio System: At “On” setting, the M15 HD will broadcast a CEC

message indicating it is an active audio system. A CEC compatible TV

will usually mute its audio output when this happens. When this option

is enabled, the M15 HD will also respond to CEC volume and mute

commands. For example, a CEC TV may forward the volume commands

from its remote to the M15 HD.

ARC Mode: Audio Return Channel (ARC) enables an ARC-enabled TV

to send audio data “upstream” to M15 HD.

This option has three choices: O, Auto or Source Setup.

Auto: When set to Auto, the M15 HD will automatically attempt an

ARC audio connection to the TV whenever the TV announces over

CEC that it has become the active source. If an ARC connection can

be established, the M15 HD will output the ARC audio signal no

matter what source is selected on the M15 HD and will show “HDMI

ARC” on the VFD. The Auto option tends to work best when all your

devices support CEC and the Source Switch option is set to On.

Source Setup: When set to Source Setup, you can select “ARC”

for the digital audio input in the source setup screen. When you

select a source on the M15 HD which is set for ARC, the M15 HD will

attempt to initiate an ARC connection with the TV. When using this

option, you would probably also want to make sure Source Switch

is o otherwise other CEC devices may keep changing the M15 HD

source when you want it to remain on the ARC source.

IMPORTANT NOTES

• “AudioSystem”mustbesetto“On”for“ARCmode”tomanifestasan

option.

• AudioandvideowillcontinuouslystreamfromtheHDMIsourcewith

CECtotheTVwithCECeveniftheM15HDisatstandbymode.

OPERATION

USING THE M15 HD  SETUP MENU

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

NAD M15 HD2 AV Manuel du propriétaire Page 15

Commentaires sur ces manuels